1. Make sure gate motor weight does not exceed the maximum weight specified.
2. The gate motor design must be suitable for the installation of auto gate system.
3. Make sure that the gate motor is installed on flat, level ground and can move and slide freely in both directions along the entire gate length.
4. Control Panel Box must be installed in the area where it is not easily damaged.
5. Do not change with parts o
|electric gate motor||0.00|
|Electric automatic swing gate...||24V DC/220VAC 50/60HZ||40w*2||US 150.00|
|Automation Release electric...||200w||US 115.00|
|rolling shutter motor /gate...||220V||0.00|