|Product||Eco Friendly Rocket Brand 45A||Promotional 540 45A esc R/C ca||Specialized high-end 540 with||Specialized high-torque 540 45|
|Place Of Origin||Guangdong, China (Mainland)||Guangdong, China (Mainland)||Guangdong, China (Mainland)||Guangdong, China (Mainland)|
|Type||Car, Car, Brushless sensorless and ESC||Car, Car, Brushless sensorless and ESC||Car, Car, Brushless sensorless and ESC||Car, Car, Brushless sensorless and ESC|
Rc car ESC 45A and 3650 750 Watts brushless motor combo use for 1/10th Scale 4wd rc toys
Thank you for your purchasing SHENZHEN SURPASS TECH CO.,LTD Brushless Electronic Speed Controller (ESC)and motor combo. This is specifically designed for operating Sensored/Sensorless brushless motors. High power systems for RC model can be very dangerous and we strongly suggest that you read this manual carefully. We have no control over the correct use, installation, application or maintenance of these products, thus no liability shall be assumed nor accepted for any damages, losses of costs resulting from the use of this item. Any claims arising from the operating, failure or malfunction etc. will be denied. We assume no liability for personal injury, property damage or consequential damages resulting from our product or our workmanship. As far as is legally permitted, the obligation for compensation is limited to the invoice amount of product in question.
♦CNC Machined 6061 T6 Billet Aluminum Heatsink Can
♦High Purity Copper Windings maximizes Efficiency
♦High RPM ABEC5 Oversized Bearings
♦Stator-Super Thin (0.2mm) Laminations
♦Precision Engineered for Maximum Energy Conversion
♦Enhanced throttle response, excellent acceleration, strong brakes and throttle linearity
♦Using advanced software interface to set up or update the software
♦Using both of LCD and LED program card to make adjustments.
♦Multiple protection features: Low voltage cut-off protection, over-heat protection and throttle signal loss
♦Compatible with NOVAK, LRP , ORION Sensored brushless motor
When using a Sensored Brushless motor, the Blue motor wire A, Yellow motor wire B and Orange motor wire C of the ESC must be connected with the Sensored motor wire A,B,C respectively. It is necessary to connect the Sensor wire to the “Sensor” socket on the ESC. Don’t change the wires sequence optionally.
When using a Sensoreless Brushless motor, the Blue motor wire A , Yellow motor wire B and Orange motor wire C of the ESC can be connected with the motor wires freely. If the motor runs in the opposite direction, please swap any two wire connections.
♦Connection to the Receiver:
Black wire RX-
Red wire RX+6.0V
White wire RX-Signal
♦Conversion of Sensored and Sensorless function
When the Power wires on the ESC are connected with the battery pack, the ESC can automatically identify the motor type (Sensored/Sensorless) via indicated LEDs.
If the ESC works at the status of Sensored, remove the Sensor wire, the ESC can be automatically changed to the status of Sensorless.
Low voltage of the battery
Over-heat of the ESC and motor (95℃)
Red and Orange LED
♦Programmable items and default settings
Forward w/o Reverse
Forward with pause then Reverse
Throttle Percent Reverse
Percentage Drag Brake