|Product||Grinding Mill Bearing Parts||Grinding Mill Bearing Parts-Ri||HGM Grinding Mill Spare Parts||HGM Grinding Mill Spare Parts|
|Power||AC 380V, 50HZ||AC 380V, 50HZ||AC 380V, 50HZ||AC 380V, 50HZ|
|Place Of Origin||Shanghai, China (Mainland)||Shanghai, China (Mainland)||Shanghai, China (Mainland)||Shanghai, China (Mainland)|
|Type||AC Motor||AC Motor||AC Motor||AC Motor|
1. What advantages does your grinding mill have?
The main advantage of our grinding mill over other kinds of mills is that you can grind a friable or crystalline material to 5 - 47 microns average particle size and classify in a very narrow particle size range at the same time; with one grinding machine, you can get different size powders, from 47 microns to 5 microns. There are no screens to plug or be punctured, and the capacity can vary from 0.5t/h to 12t/h.
2. How does your milling compare with other methods of grinding such as a hammer mill?
Superfine powder is the biggest advantage of our grinding mill. With the developing trend of fine and super fine powders, our gridning mill gonna be the one which suit the market demands best. Well designed, high speed mechanical mills can grind some friable materials into the low micron-size range; but, wear and product contamination is a serious problem, as is attritional heat. Practically, the high-speed mechanical mill (ball etc. mill) with a typical mid range of 400 mesh. Abrasive products will seriously erode most ball mills, adding metallic contamination to the product. Materials that degrade with heat or have low melt temperatures are a problem in ball mills because of the heat generated in the mill. Well, our grinding mills have overcome the above problems and guarantee good grinding effect for powders. Also, we save a lot of energies at the same time.
3. What particle size range does your grinding mill produce?
Typically the Clirik® mill will grind non-inflammable, non-explosive and brittle materials with Moh's hardness under 9, such as calcite, chalk, limestone, dolomite, kaolin, bentonite, talc, mica, magnesite, illite, pyrophyllite and vermiculate, sepiolite, attapulgite, rectorite, diatomite, diatomite, barite, gypsum, alunite, graphite, fluorite, rockphosphate, kalium ore, pumice, diopside, etc down to 5 to 47 micron average particle size range. Typically, normal raymond mill can only get 50-325 mesh powders, while with our grinding mill, 325-2500 mesh powders are available and you can vary the particle size with one machine.It enlarges your choice and gets you more profit.
4. How do you adjust particle size in your mill?
Particle size is adjusted primarily by a change in the classifier. You just need to change the current on the display screen and you can change the particle size. It is simple and convenient, also quick.