|Place Of Origin|
30A ESC 30A for Multicopter
Specially designed for multicoptor
Flashed with the latest SimonK firmware.
You can update the firmware anytime you like via the servo cable.
SK30A is using Rubycon or equivalent grade "Low ESR" capacitor in order to provide a stable power source and BEC performance.
Excellent safety performance when the battery is connected,
no matter what position the throttle stick,
the motor will not start in order to prevent harm to the human body.
Constant Current: 30A
Burst Current: 40A
BEC Output: 5V/ 2A Linear
Input volt: 2-5S Lipo, 5-12 NiCad/NiMh
Dimensions (LxWxH): 46*26*11mm (1.81*1.02*0.43")
Weight w/Wires: 25g (0.88 zo)
ReadyGoRC.com strongly recommend you read the manual prior to using this ESC as some settings (such as cell type) must be set before operation.
Note1: BEC means the “Battery Elimination Circuit”. It is a DC-DC voltage regulator to supplies the receiver and other equipments from the main battery pack. With the build-inBEC of an ESC, the receiver needn’t to be supplied with an additional battery pack.
Note 2: The ESC named “xxx-xxx-OPTO” hasn’t a built-in BEC, an UBEC (Ultimate-BEC) or an individual battery pack should be used to power the receiver. And an individual battery pack is needed to power the program card when setting the programmable value of such ESCs, please read the user manual of program card for reference.