|Product||High Quality 1.5V DC Mini Gear||Hollow Shaft DC Motor||miniature low-voltage dc motor||single shaft hub motor hollow|
|Power||TBD||DC low voltage||<30w||350W|
|Voltage||1.5-3.0V||12V / 24V / 90V||3-24vdc||48V|
|Place Of Origin||Guangdong, China (Mainland)||Henan, China (Mainland)||Guangdong China (mainland)||Jiangsu, China (Mainland)|
|Type||Carbon brush||general/reinforced helical gear, milling keyway||Gear Motor||Servo Motor|
|Usage||Boat, Car, Electric Bicycle, Fan, Home Appliance, Massager ,Adult Toy,Beauty Apparatus||Boat, Car, Electric Bicycle, Fan, Home Appliance||Boat,car,electric Bicycle,fan,home Appliance,,security And Safe Industry||Electric Bicycle, Electric tricycle, four wheel car|
High Quality 1.5V DC Mini Gear Motor / Hollow Shaft DC Motor
What does it look like?
Q: What kind motors you can provide?
A: For now, we mainly provide permanent magnet brushed dc motors (including vibration motors, low voltage dc motors and high voltage dc motors) with diameter range in 6~52mm and also Dia10~80mm size gear motors. But we also provide a few shaded pole AC motors which are not shown on our website.
Q: Is there a MOQ for your motors?
A: Yes. The MOQ is between 1000~10,000pcs for different models after sample approval. But it's also okay for us to accept smaller lots like a few dozens, hundreds or thousands for the initial 3 orders after sample approval. FOr samples, there is no MOQ requirement. But the less the better (like no more than 5pcs) on condition that the quantity is enough in case any changes needed after initial testing.
Q: Could you send me a price list?
A: For all of our motors, they are customized based on different requirements like lifetime, noise, voltage, and shaft etc. The price also varies according to annual quantity. So it's really difficult for us to provide a price list. If you can share your detailed requirements and annual quantity, we'll see what offer we can provide.
Q: Are you motors reversible?
A: For all the low voltage dc motors, they are reversible (when you exchange the electrical poles, they can run in another direction). For the high voltage dc motors, if clients only need to run the motor in one direction, we'll shift the brushes by some small angle in reference to the permanent magnet (brush offset). That can favor the required one direction of rotation, but the other direction has higher sparkling and worse performance. The stall torque for the favor rotation will be less, but the max. Efficiency point will be higher.
Q: Is it possible for you to develop new motors if we provide the tooling cost?
A: Yes. Please kindly share the detailed requirements like performance, size, annual quantity, target price etc. Then we'll make our evaluation to see if we can arrange or not.
How to Contact Us?
Send your Inquiry in the Below for Detail Information, Click ' Send ' Now!
Tel: +86-0755-21677419-607 (Mike)