|Product||R Serial Helical Inline Geared||R series foot-mounted helical||Cycolidal Pinwheel Planetary C||R77 helical inline gear reduce|
|Brand Name||YBANG||HRPW||WAN XIN||DOFINE|
|Place Of Origin||Zhejiang, China (Mainland)||Shandong, China (Mainland)||Shandong, China (Mainland)||Zhejiang, China (Mainland)|
R Series Rigid Tooth Flank Helical Gearbox
1. Gearbox output speed: up to 1028 r/min
2. Gearbox output torque: up to 18000 N.m
3. Gearbox driving motor output: 0.12~160 kW
4. Gearbox frame range: R17~R167
5. Gearbox various mounting design: R, RF, RX, RXF
1. Helical gearbox is based on the building block design, so it’s convenient for them to fit all types of motors or to connect with other power input. The same type of gearbox can fit motors with different power, so that it is possible for different types of machines to combine or connect.
2. High transmission efficiency. A single machine can reach a transmission efficiency as much as 96%
3. Precise division of transmission ratio with a wide range. The combination of machines can produce a larger transmission ratio at a low output rotational speed.
4. High performance, high safety factor, Low consumed energy, small vibration, low noise, high precision, big torque and long working life.
1. Working temperature: -40~50°C. the lubrication should be heated until about 0°C if the machine works below 0°C.
2. The working place should be lower than 1,000 meters above sea level.
3. The input rotational speed should not exceed 1800 r/min. The circumferential speed of the gear should not exceed 20 m/s.
4. Suitable for normal-reverse rotation.
5. Without industry limitation.
6. Please consult our technical supporting department for other circumstances.
2. Shipping: 30 days after the order is confirmed.